| Product description: MOSFET inverter cutting machine 1, High frequency arc striking 2,Cutting speed is 1.8 times higher than flame cutting 3,Recommended cutting thickness is 7mm, maximum cutting thickness is15mm 4,Compressed air is required 5,Over /under voltage protection, thermal protection, over Technical Parameters ModelLGK-40LGK-60CUT-100CUT-120 Rated input voltage /frequencySingle Phase 220V土 15%Three Phases 380V±15% 50/60Hz Rated input capacity (KVA)6.09.015.225.7 Rated input current (A)9.113.723.139 Rated output voltage (V)96104120128 Output current range (A)20-4020-6020-10020-120 Output no load voltage (V)230260298345 Rated duty cycle (%)60 Air pressure (M p a)0.45-0.55 Max cutting thickness(mm)8153035 Best cutting thickness(mm)1〜51-81-121-18 Gas flow(L/min)250 Arc methodHigh frequency Enclosure protection class1P21S Insulation gradeF Exterior size L x W x H (mm)450x270x335675x615x452690x370x580705x385x595 Weight(kg)92536.543.5Plasma Cutter factory website:http://www.sz-manufacturer.com/welding-machine/plasma-cutter/. |
↧
Plasma Cutter factory
↧